Solar PV Power Plants

SOLAR STAND-ALONE SYSTEM:

Solar PV Power Plants

The whole system comprises of Solar PV Module, SPV Array, Solar Charge Controllers, Battery Bank, Module Mounting Structures (MMS), Lighting and Over Voltage Protection, Earthing Protection amongst other vital components. The individual components descriptions are explained later in the next section.

Solar PV Modules generates DC electricity in proportion to the amount of sunlight available, generating the most power on a clear day when the sun is at a normal angle to the Solar PV Modules; and these Solar PV Modules are connected in series and parallel to form a SolarArray, which can collectively support the intended loads. The cables cross sections are selected in such a way that the voltages drop and losses is kept at a minimum. The Solar PV Array is mounted on the Module Mounting Structure (MMS) which are oriented towards the south and tilted at an angle which is determined by the latitude of the location. The DC power produced from Solar Array through the DC Distribution Box is fed to the Power Conditioning Unit (PCU). The PCU installed in a control room converts the DC Energy produced by the solar array to AC Energy. The AC Power output of the inverter shall be fed to the AC Distribution Box.

It is essential to protect the system from various concerns and in this regard we have incorporated Earthing Protection. The MMS material is hot dip galvanized to protect the material from corrosion.

 

GRID CONNECTED SYSTEM:

The Decentralized and Grid Connected systems are very helpful in reducing the dependence of the consumer on the Grid. These systems harness the solar energy, then Convert to DC to AC by the help of Inverter then it will connect toAC operating the applicable loads.

The whole system comprises of Solar PV Module, SPVArray, Solar Grid Inverter, and Module Mounting Structures (MMS) amongst other vital components. The individual components descriptions are explained later in the next section.

Solar PV Modules generates DC electricity in proportion to the amount of sunlight available, generating the most power on a clear day when the sun is at a normal angle to the Solar PV Modules; and these Solar PV Modules are connected in series and parallel to form a Solar Array, which can collectively support the intended loads. The Solar PVArray are mounted on the Module Mounting Structure (MMS) which are oriented towards the south and tilted at an angle which determined by the latitude of the location. The DC power produced from Solar Array and it will go through Solar Grid PCU (inverter + Charge Controller) and it will converter DC to AC. This energy is utilized to support the AC Applicable loads at the site via the AC Distribution Box. The cables cross sections are selected in such away that the voltage drops and losses is kept at a minimum.

It is essential to protect the system from various concerns and in this regard, we have incorporated Earthing Protection. The MMS Material is hotdip galvanized to protect the Material from corrosion.

We are capable to supply 1 to 10KW Solar Stand Alone System / Grid Connected System Power Plant as per requirement of the customer.